RENEWPOWERS - PRODUCTS

The Xantrex GT250E Grid Tie Inverter is based on a reliable platform that is used in grid-connected photovoltaic and wind turbine applications in North America and Europe. Easy to install and operate, the GT250E automates startup and shutdown. It incorporates advanced Maximum Power Point Tracking (MPPT) technology to maximize the energy harvested from a PV array. To minimize power losses during the conversion process, the inverter’s switching technology uses insulated gate bi-polar transistors. Multiple inverters can be paralleled for large power installations. Designed for European PV installations, the GT250E is compliant to applicable European directives.

Features

Digital Signal Processor (DSP) based controls with self-diagnostics and LCD for display of operating status
Inverter shut-off and disconnects
Over-and under-voltage and frequency protection, shutting down the inverter
Anti-islanding protection prevents back-feeding inverter generated power to the grid
in the event of a utility outage
User definable power tracking allows the user to match the inverter to the array, as well as to adjust delay periods to customize system shutdown sequences
Graphical user interface software for real time communications, monitoring, and control

Options

Remote monitoring via telephone modem
Fault notification via modem
Data acquisition and logging
Warranty extension up to 20 years
Performance warranty contract

Technical Specifications	Back to Top

	Electrical Specifications
	Continuous power rating	250 kW AC
	Nominal AC voltage	20 kV AC three phase (other levels on request)
	Nominal AC frequency	50 Hz (60 Hz on request)
	Line power factor	> 0.99 above 20% rated power
	AC current distortion	<3% THD at rated power
	Nominal DC voltage rating	600 VDC
	Maximum AC line current	500 AAC
	Standby tare loss	< 100 W
	Night consumption	< 100 W
	Maximum AC line current	164 amps AC
	Minimum DC voltage for feed-in	450 VDC
	Suggested PV power	280 kWp
	Maximum CD current	555 A
	Max. open circuit voltage	850 VDC (optional 880 VDC)
	Power tracking window range	450 to 800 VDC
	Maximum efficiency	96% at medium voltage level
	European efficiency	95% at medium voltage level
	General Specifications
	Ambient temperature range	-10 °C to +45 °C
	Enclosure environmental rating	IP21
	Enclosure	Rittal TS Series
	Weight	1160 kg
	Dimensions (H x W x D)	211 x 200 x 60 cm
	Altitude	up to 1500 m without de-rating
	Relative humidity	0 to 95% non-condensing
	Features & Options
	Cooling method	Forced convection cooling
	Protective functions	AC over / under voltage, AC over / under frequency, over temperature, AC and DC over current, DC over voltage
	User display standard	LCD, 4-line, 80-characters with keypad
	Disconnects (AC & DC)	Integral to inverter assembly
	Isolation/medium voltage transformer	Integral to turn key system
	Communications software	Graphical user interface software for real time communications and control
	Data acquisition and logging	Adjustable
	Interfaces	Webserver or Telephone modem for remote system monitoring and faults notification
	Approvals & Safety
	The GT100E is compliant to applicable European Directive and CE marked
	The GT250E complies with the requirements of VDEW

Note: Specifications subject to change without notice.