RENEWPOWERS - PRODUCTS

	Grid Tie Inverter GT100E Designed for European grid-connected PV installations, the GT100E is a 100kW three-phase inverter that meets all applicable CE requirements, is approved by the TÜV Rheinland and fullfills the royal Decret RD1663/2000.
	Product Info \| Specifications \| Datasheet

Description

The Xantrex GT100E Grid Tie Inverter is based on a reliable platform that is used in grid-connect photovoltaic and wind turbine applications in North America and Europe. Easy to install and operate, the GT100E automates start up, and shut down. It incorporates advanced Maximum Power Point Tracking Technology to maximize the energy harvested from a PV array. To minimize power losses during the conversion process, the inverter’s switching technology uses insulated gate bi-polar
transistors. Multiple inverters can be paralleled for large power installations. Designed for European PV installations, the GT100E meets all applicable CE requirements, is approved by the TÜV Rheinland and fullfills the royal Decret RD 1663/2000.

Features

Digital Signal Processor (DSP) based controls with self-diagnostics and LCD for display of operating status.
Inverter shut off and disconnects.
Over- and under-voltage and frequency protection, shutting down the inverter.
Anti-islanding protection - prevents back-feeding inverter-generated power to the grid in the event of a utility outage.
User definable power tracking allows the user to match the inverter to the array, as well as to adjust delay periods to customize system shutdown sequences.
Graphical user interface software for real time communications, monitoring, and control

Options

Remote monitoring via telephone modem
Faults notification via modem
Data acquisition and logging
Warranty extension up to 20 years
Performance warranty contract

Technical Specifications	Back to Top

	Electrical Specifications
	Continuous Power Rating	100 kW AC
	Nominal DC Power Rating	105 kW DC
	Nominal AC Voltage	400 VAC three phase
	Nominal AC Frequency	50 Hz
	Line Power Factor	> 0.99 above 20% rated power
	Maximum AC Line Current	164 amps AC
	AC Current Distortion	< 3% THD at rated power
	Max. Open Circuit Voltage	650 VDC
	Power Tracking Window Range	300 to 600 VDC
	Max. DC Input Current	319 amps DC
	Peak Inverter Efficiency	95.5% (includes transformer)
	European Weighted Efficiency	94.6%
	Standby Tare Losses	93 watts
	General Specifications
	Ambient Temperature Range	-10 °C to +45 °C
	Enclosure Environmental Rating	IP21
	Enclosure	Rittal TS Series
	Weight	955 kg
	Dimensions (H x W x D)	196 x 120 x 60 cm
	Altitude	up to 2000 m without de-rating
	Relative Humidity	0 to 95% non-condensing
	Features & Options
	Cooling Method	Forced convection cooling
	Protective Functions	AC over / under voltage, AC over / under frequency, over temperature, AC and DC over current, DC over voltage
	User Display Standard	LCD, 4-line, 20-characters with keypad
	Disconnects (AC & DC)	Integral to inverter assembly
	Isolation Transformer	Integral to inverter assembly
	Communications Software	Graphical user interface software for real time communications and control
	Data Acqusition and Logging	Adjustable
	Interfaces	Telephone modem for remote monitoring and faults notification via modem, RS232
	Approvals & Safety
	The GT100E is compliant to applicable European Directive and CE marked :	EMC Directive: EN 50081-2, EN 50082-2; Low Voltage Directive: EN 50178
	The GT100E complies with the requirements of VDEW
	The GT100E is approved by the TÜV Rheinland
	The GT100E complies with the requirements of the Royal Decret (RD1663/2000), Spain

Note: Specifications subject to change without notice.